DVA KS20
26.490,00 DKK
DVA KS20 is the perfect low-end complement for larger DVA K5 systems and can be used both horizontally or vertically in groundstacked configurations
✅ Vi prismatcher alle danske forhandlere inkl. Thomann i Tyskland.
På fjernlager, kontakt os for aktuel leveringstid
| Speaker Type | Active Bassreflex-Horn loaded Subwoofer | |
| Acoustical data | ||
| Frequency Response [-10dB] | 11 – 120 Hz | |
| Max SPL | 138 dB | |
| Directivity | Omnidirectional | |
| LF | 2×18” | |
| Voice Coil LF | 1” | |
| Amplifier | ||
| Amp Technology | Digipro G3 | |
| Amp Class | Class D | |
| RMS Power | 1800 W | |
| Peak Power | 3600 W | |
| Cooling | Convection | |
| Power Supply | 1800 W SMPS with auto range PSU | |
| Processor | ||
| Controller | DSP 56 Bit | |
| AD/DA Converter | 24 bit/18Hz | |
| System Presets | X-Over, Delay | |
| Limiter | Dual Active Multiband RMS, Peak, Thermal | |
| Crossover Frequency LF-HF | 90, 120 Hz (selectable) | |
| Slope LF-HF | 24 dB/Octave | |
| Input | ||
| Input Selection | 2x XLR Balanced | |
| Output Selection | 2x XLR Balanced | |
| Power Socket | 1x PowerCON in | 1x PowerCON Out | |
| Controls | 1x Input Sensitivity Rotary Switch
1x Setup Rotary Encoder (delay up to 4.5 ms on-board) 1x Polarity Inversion Switch 1x X-over Frequency Switch (90 Hz, 120 Hz) 1x Output mode Switch (Link-X-Over) |
|
| Mechnaics | ||
| Housing | Plywood | |
| Handles | 3x Per Side | |
| Rigging Points | 3xPick Points on top to fix DRK10/20 rigging frames |
|
| Pole Mount | 1x M20 on top | |
| Dimensions (W x H x D) | 1100 x 580 x 720 mm | |
| Weight | 84 kg |
Vær den første til at anmelde “DVA KS20”
Du skal være logged in for at afgive en anmeldelse.
Relaterede varer
23.225,00 DKK
10.285,00 DKK
9.780,00 DKK
10.830,00 DKK
16.885,00 DKK
33.335,00 DKK
Vejledende: 9.345,00 DKK
10.285,00 DKK
22.580,00 DKK
Anmeldelser
Der er endnu ikke nogle anmeldelser.